Markdown PHP 1.3 | the original parser

TextMate

Download

You can download TextMate from here.

Feedback

You can use the TextMate mailing list or #textmate IRC channel on freenode.net for questions, comments, and bug reports.

You can also contact MacroMates.

Before you submit a bug report please read the writing bug reports instructions.

Screenshot

textmate

Building

Bootstrap

To bootstrap the build you need to run ./configure (in the root of the source tree). You can set a few (environment) variables read by this script that change the generated build file:

In the simplest case you would run:

git clone https://github.com/textmate/textmate.git
cd textmate
git submodule update --init
./configure && ninja

Please note that if you downloaded the source code (rather than cloned via git) you likely miss the submodules and the build will therefore fail.

Prerequisites

To build the source the following must first be installed on your system:

You need to manually install Cap’n Proto if you're not using homebrew. To install the other dependencies via MacPorts run:

sudo port install ninja ragel boost multimarkdown mercurial sparsehash

If port fails with a build error then likely you need to agree (system-wide) to Apple’s Xcode license:

sudo xcodebuild -license

To install using homebrew run:

brew install ragel boost multimarkdown hg ninja capnp google-sparsehash

In practice hg (mercurial) is only required for the SCM library’s tests so you can skip this dependency if you don’t mind a failing test.

OS X 10.7 (Lion)

If you are on OS X 10.7 you need pgrep and pkill (used by the “relaunch” build targets). To install using MacPorts:

sudo port install proctools

Or using homebrew:

brew install proctools

Building from within TextMate

You should install the Ninja and CxxTest bundles. Both can be installed via PreferencesBundles.

After this you can press ⌘B to build from within TextMate. In case you haven't already you also need to set up the PATH variable either in PreferencesVariables or ~/.tm_properties so it can find ninja and related tools; an example could be $PATH:/opt/local/bin.

The default target is TextMate/run. This will relaunch TextMate but when called from within TextMate, a dialog will appear before the current instance is killed. As there is full session restore, it is safe to relaunch even with unsaved changes.

If the current file is a test file then the target to build is changed to build the library to which the test belongs (this is done by setting TM_NINJA_TARGET in the .tm_properties file found in the root of the source tree).

Similarly, if the current file belongs to an application target (other than TextMate.app) then TM_NINJA_TARGET is set to build and run this application.

Build Targets

The build system classifies a target either as a library or an application. The latter can either be a bundled or non-bundled application. E.g. mate is non-bundled (just a mate executable) where TextMate.app is a bundled application.

For each output there are a few symbolic targets you can build. While the examples below refer to a specific library or application, they exist for all targets of same type.

For the io library:

ninja io                 # Build the io library and run tests.
ninja io/coerce          # Build the io library and skip tests.
ninja io/clean           # Remove the build folder for the io library.
ninja io/headers         # Copy exported headers to $builddir/include.

For the mate (non-bundled) application:

ninja mate               # Build the mate executable.
ninja mate/run           # Build and run the mate executable.
ninja mate/clean         # Remove the build folder for the mate executable.

For the TextMate.app application:

ninja TextMate           # Build and sign TextMate.app.
ninja TextMate/run       # Build, sign, and run TextMate.app.
ninja TextMate/clean     # Remove the build folder for TextMate.app.
ninja TextMate/dsym      # Create a tarball with extracted dSYM files.
ninja TextMate/tbz       # Create a tarball of TextMate.app. Also produce the dsym tarball.
ninja TextMate/deploy    # Push a nightly build. Fails without proper credentials :)

Note that ninja TextMate/clean only cleans the TextMate build folder ($builddir/Applications/TextMate), but all libraries and applications it depends on are not cleaned.

To clean everything run:

ninja -t clean

Legal

The source for TextMate is released under the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

TextMate is a trademark of Allan Odgaard.

Parsed in 2.87 ms
<h1>TextMate</h1>

<h2>Download</h2>

<p>You can <a href="http://macromates.com/download">download TextMate from here</a>.</p>

<h2>Feedback</h2>

<p>You can use <a href="http://lists.macromates.com/listinfo/textmate">the TextMate mailing list</a> or <a href="irc://irc.freenode.net/#textmate">#textmate</a> IRC channel on <a href="http://freenode.net/">freenode.net</a> for questions, comments, and bug reports.</p>

<p>You can also <a href="http://macromates.com/contact">contact MacroMates</a>.</p>

<p>Before you submit a bug report please read the <a href="http://kb.textmate.org/writing_bug_reports">writing bug reports</a> instructions.</p>

<h2>Screenshot</h2>

<p><img src="https://raw.github.com/textmate/textmate/gh-pages/images/screenshot.png" alt="textmate" /></p>

<h1>Building</h1>

<h2>Bootstrap</h2>

<p>To bootstrap the build you need to run <code>./configure</code> (in the root of the source tree). You can set a few (environment) variables read by this script that change the generated build file:</p>

<ul>
<li><code>builddir</code> — location of built files. Defaults to <code>~/build/TextMate</code>.</li>
<li><code>identity</code> — for Apple’s <code>codesign</code>. Defaults to ad-hoc signing, which does not use an identity at all.</li>
<li><code>boostdir</code> — location of boost includes. By default it will search various locations including MacPorts and Homebrew.</li>
<li><code>sparsedir</code> — location of sparsehash includes. By default it will search various locations including MacPorts and Homebrew.</li>
<li><code>CC</code> and <code>CXX</code> — C and C++ compiler.</li>
</ul>

<p>In the simplest case you would run:</p>

<pre><code>git clone https://github.com/textmate/textmate.git
cd textmate
git submodule update --init
./configure &amp;&amp; ninja
</code></pre>

<p>Please note that if you downloaded the source code (rather than cloned via git) you likely miss the submodules and the build will therefore fail.</p>

<h2>Prerequisites</h2>

<p>To build the source the following must first be installed on your system:</p>

<ul>
<li><a href="http://martine.github.com/ninja/">ninja</a>         — build system similar to <code>make</code></li>
<li><a href="http://www.complang.org/ragel/">ragel</a>         — state machine compiler</li>
<li><a href="http://www.boost.org/">boost</a>         — portable C++ source libraries</li>
<li><a href="https://code.google.com/p/sparsehash/">sparsehash</a>    — A cache friendly hash_map</li>
<li><a href="http://fletcherpenney.net/multimarkdown/">multimarkdown</a> — marked-up plain text compiler</li>
<li><a href="http://mercurial.selenic.com/">mercurial</a>     — distributed SCM system</li>
<li><a href="http://kentonv.github.io/capnproto/">Cap’n Proto</a> — serialization library</li>
</ul>

<p>You need to manually install <a href="http://kentonv.github.io/capnproto/">Cap’n Proto</a> if you're not using <a href="http://brew.sh/">homebrew</a>. To install the other dependencies via <a href="http://www.macports.org/">MacPorts</a> run:</p>

<pre><code>sudo port install ninja ragel boost multimarkdown mercurial sparsehash
</code></pre>

<p>If <code>port</code> fails with a build error then likely you need to agree (system-wide) to Apple’s Xcode license:</p>

<pre><code>sudo xcodebuild -license
</code></pre>

<p>To install using <a href="http://brew.sh/">homebrew</a> run:</p>

<pre><code>brew install ragel boost multimarkdown hg ninja capnp google-sparsehash
</code></pre>

<p>In practice <code>hg</code> (<a href="http://mercurial.selenic.com/">mercurial</a>) is only required for the SCM library’s tests so you can skip this dependency if you don’t mind a failing test.</p>

<h3>OS X 10.7 (Lion)</h3>

<p>If you are on OS X 10.7 you need <code>pgrep</code> and <code>pkill</code> (used by the “relaunch” build targets). To install using <a href="http://www.macports.org/">MacPorts</a>:</p>

<pre><code>sudo port install proctools
</code></pre>

<p>Or using <a href="http://brew.sh/">homebrew</a>:</p>

<pre><code>brew install proctools
</code></pre>

<h2>Building from within TextMate</h2>

<p>You should install the <a href="https://github.com/textmate/ninja.tmbundle">Ninja</a> and <a href="https://github.com/textmate/cxxtest.tmbundle">CxxTest</a> bundles. Both can be installed via <em>Preferences</em> → <em>Bundles</em>.</p>

<p>After this you can press ⌘B to build from within TextMate. In case you haven't already you also need to set up the <code>PATH</code> variable either in <em>Preferences</em> → <em>Variables</em> or <code>~/.tm_properties</code> so it can find <code>ninja</code> and related tools; an example could be <code>$PATH:/opt/local/bin</code>.</p>

<p>The default target is <code>TextMate/run</code>. This will relaunch TextMate but when called from within TextMate, a dialog will appear before the current instance is killed. As there is full session restore, it is safe to relaunch even with unsaved changes.</p>

<p>If the current file is a test file then the target to build is changed to build the library to which the test belongs (this is done by setting <code>TM_NINJA_TARGET</code> in the <code>.tm_properties</code> file found in the root of the source tree).</p>

<p>Similarly, if the current file belongs to an application target (other than <code>TextMate.app</code>) then <code>TM_NINJA_TARGET</code> is set to build and run this application.</p>

<h2>Build Targets</h2>

<p>The build system classifies a target either as a library or an application. The latter can either be a bundled or non-bundled application. E.g. <code>mate</code> is non-bundled (just a <code>mate</code> executable) where <code>TextMate.app</code> is a bundled application.</p>

<p>For each output there are a few symbolic targets you can build. While the examples below refer to a specific library or application, they exist for all targets of same type.</p>

<p>For the <code>io</code> library:</p>

<pre><code>ninja io                 # Build the io library and run tests.
ninja io/coerce          # Build the io library and skip tests.
ninja io/clean           # Remove the build folder for the io library.
ninja io/headers         # Copy exported headers to $builddir/include.
</code></pre>

<p>For the <code>mate</code> (non-bundled) application:</p>

<pre><code>ninja mate               # Build the mate executable.
ninja mate/run           # Build and run the mate executable.
ninja mate/clean         # Remove the build folder for the mate executable.
</code></pre>

<p>For the <code>TextMate.app</code> application:</p>

<pre><code>ninja TextMate           # Build and sign TextMate.app.
ninja TextMate/run       # Build, sign, and run TextMate.app.
ninja TextMate/clean     # Remove the build folder for TextMate.app.
ninja TextMate/dsym      # Create a tarball with extracted dSYM files.
ninja TextMate/tbz       # Create a tarball of TextMate.app. Also produce the dsym tarball.
ninja TextMate/deploy    # Push a nightly build. Fails without proper credentials :)
</code></pre>

<p>Note that <code>ninja TextMate/clean</code> only cleans the TextMate build folder (<code>$builddir/Applications/TextMate</code>), but all libraries and applications it depends on are not cleaned.</p>

<p>To clean everything run:</p>

<pre><code>ninja -t clean
</code></pre>

<h1>Legal</h1>

<p>The source for TextMate is released under the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.</p>

<p>TextMate is a trademark of Allan Odgaard.</p>
Parsedown | the parser that we created

TextMate

Download

You can download TextMate from here.

Feedback

You can use the TextMate mailing list or #textmate IRC channel on freenode.net for questions, comments, and bug reports.

You can also contact MacroMates.

Before you submit a bug report please read the writing bug reports instructions.

Screenshot

textmate

Building

Bootstrap

To bootstrap the build you need to run ./configure (in the root of the source tree). You can set a few (environment) variables read by this script that change the generated build file:

In the simplest case you would run:

git clone https://github.com/textmate/textmate.git
cd textmate
git submodule update --init
./configure && ninja

Please note that if you downloaded the source code (rather than cloned via git) you likely miss the submodules and the build will therefore fail.

Prerequisites

To build the source the following must first be installed on your system:

You need to manually install Cap’n Proto if you're not using homebrew. To install the other dependencies via MacPorts run:

sudo port install ninja ragel boost multimarkdown mercurial sparsehash

If port fails with a build error then likely you need to agree (system-wide) to Apple’s Xcode license:

sudo xcodebuild -license

To install using homebrew run:

brew install ragel boost multimarkdown hg ninja capnp google-sparsehash

In practice hg (mercurial) is only required for the SCM library’s tests so you can skip this dependency if you don’t mind a failing test.

OS X 10.7 (Lion)

If you are on OS X 10.7 you need pgrep and pkill (used by the “relaunch” build targets). To install using MacPorts:

sudo port install proctools

Or using homebrew:

brew install proctools

Building from within TextMate

You should install the Ninja and CxxTest bundles. Both can be installed via PreferencesBundles.

After this you can press ⌘B to build from within TextMate. In case you haven't already you also need to set up the PATH variable either in PreferencesVariables or ~/.tm_properties so it can find ninja and related tools; an example could be $PATH:/opt/local/bin.

The default target is TextMate/run. This will relaunch TextMate but when called from within TextMate, a dialog will appear before the current instance is killed. As there is full session restore, it is safe to relaunch even with unsaved changes.

If the current file is a test file then the target to build is changed to build the library to which the test belongs (this is done by setting TM_NINJA_TARGET in the .tm_properties file found in the root of the source tree).

Similarly, if the current file belongs to an application target (other than TextMate.app) then TM_NINJA_TARGET is set to build and run this application.

Build Targets

The build system classifies a target either as a library or an application. The latter can either be a bundled or non-bundled application. E.g. mate is non-bundled (just a mate executable) where TextMate.app is a bundled application.

For each output there are a few symbolic targets you can build. While the examples below refer to a specific library or application, they exist for all targets of same type.

For the io library:

ninja io                 # Build the io library and run tests.
ninja io/coerce          # Build the io library and skip tests.
ninja io/clean           # Remove the build folder for the io library.
ninja io/headers         # Copy exported headers to $builddir/include.

For the mate (non-bundled) application:

ninja mate               # Build the mate executable.
ninja mate/run           # Build and run the mate executable.
ninja mate/clean         # Remove the build folder for the mate executable.

For the TextMate.app application:

ninja TextMate           # Build and sign TextMate.app.
ninja TextMate/run       # Build, sign, and run TextMate.app.
ninja TextMate/clean     # Remove the build folder for TextMate.app.
ninja TextMate/dsym      # Create a tarball with extracted dSYM files.
ninja TextMate/tbz       # Create a tarball of TextMate.app. Also produce the dsym tarball.
ninja TextMate/deploy    # Push a nightly build. Fails without proper credentials :)

Note that ninja TextMate/clean only cleans the TextMate build folder ($builddir/Applications/TextMate), but all libraries and applications it depends on are not cleaned.

To clean everything run:

ninja -t clean

Legal

The source for TextMate is released under the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

TextMate is a trademark of Allan Odgaard.

Parsed in 1 ms or 3 times faster
<h1>TextMate</h1>
<h2>Download</h2>
<p>You can <a href="http://macromates.com/download">download TextMate from here</a>.</p>
<h2>Feedback</h2>
<p>You can use <a href="http://lists.macromates.com/listinfo/textmate">the TextMate mailing list</a> or <a href="irc://irc.freenode.net/#textmate">#textmate</a> IRC channel on <a href="http://freenode.net/">freenode.net</a> for questions, comments, and bug reports.</p>
<p>You can also <a href="http://macromates.com/contact">contact MacroMates</a>.</p>
<p>Before you submit a bug report please read the <a href="http://kb.textmate.org/writing_bug_reports">writing bug reports</a> instructions.</p>
<h2>Screenshot</h2>
<p><img src="https://raw.github.com/textmate/textmate/gh-pages/images/screenshot.png" alt="textmate" /></p>
<h1>Building</h1>
<h2>Bootstrap</h2>
<p>To bootstrap the build you need to run <code>./configure</code> (in the root of the source tree). You can set a few (environment) variables read by this script that change the generated build file:</p>
<ul>
<li><code>builddir</code> — location of built files. Defaults to <code>~/build/TextMate</code>.</li>
<li><code>identity</code> — for Apple’s <code>codesign</code>. Defaults to ad-hoc signing, which does not use an identity at all.</li>
<li><code>boostdir</code> — location of boost includes. By default it will search various locations including MacPorts and Homebrew.</li>
<li><code>sparsedir</code> — location of sparsehash includes. By default it will search various locations including MacPorts and Homebrew.</li>
<li><code>CC</code> and <code>CXX</code> — C and C++ compiler.</li>
</ul>
<p>In the simplest case you would run:</p>
<pre><code>git clone https://github.com/textmate/textmate.git
cd textmate
git submodule update --init
./configure &amp;&amp; ninja</code></pre>
<p>Please note that if you downloaded the source code (rather than cloned via git) you likely miss the submodules and the build will therefore fail.</p>
<h2>Prerequisites</h2>
<p>To build the source the following must first be installed on your system:</p>
<ul>
<li><a href="http://martine.github.com/ninja/">ninja</a>         — build system similar to <code>make</code></li>
<li><a href="http://www.complang.org/ragel/">ragel</a>         — state machine compiler</li>
<li><a href="http://www.boost.org/">boost</a>         — portable C++ source libraries</li>
<li><a href="https://code.google.com/p/sparsehash/">sparsehash</a>    — A cache friendly hash_map</li>
<li><a href="http://fletcherpenney.net/multimarkdown/">multimarkdown</a> — marked-up plain text compiler</li>
<li><a href="http://mercurial.selenic.com/">mercurial</a>     — distributed SCM system</li>
<li><a href="http://kentonv.github.io/capnproto/">Cap’n Proto</a> — serialization library</li>
</ul>
<p>You need to manually install <a href="http://kentonv.github.io/capnproto/">Cap’n Proto</a> if you're not using <a href="http://brew.sh/">homebrew</a>. To install the other dependencies via <a href="http://www.macports.org/">MacPorts</a> run:</p>
<pre><code>sudo port install ninja ragel boost multimarkdown mercurial sparsehash</code></pre>
<p>If <code>port</code> fails with a build error then likely you need to agree (system-wide) to Apple’s Xcode license:</p>
<pre><code>sudo xcodebuild -license</code></pre>
<p>To install using <a href="http://brew.sh/">homebrew</a> run:</p>
<pre><code>brew install ragel boost multimarkdown hg ninja capnp google-sparsehash</code></pre>
<p>In practice <code>hg</code> (<a href="http://mercurial.selenic.com/">mercurial</a>) is only required for the SCM library’s tests so you can skip this dependency if you don’t mind a failing test.</p>
<h3>OS X 10.7 (Lion)</h3>
<p>If you are on OS X 10.7 you need <code>pgrep</code> and <code>pkill</code> (used by the “relaunch” build targets). To install using <a href="http://www.macports.org/">MacPorts</a>:</p>
<pre><code>sudo port install proctools</code></pre>
<p>Or using <a href="http://brew.sh/">homebrew</a>:</p>
<pre><code>brew install proctools</code></pre>
<h2>Building from within TextMate</h2>
<p>You should install the <a href="https://github.com/textmate/ninja.tmbundle">Ninja</a> and <a href="https://github.com/textmate/cxxtest.tmbundle">CxxTest</a> bundles. Both can be installed via <em>Preferences</em> → <em>Bundles</em>.</p>
<p>After this you can press ⌘B to build from within TextMate. In case you haven't already you also need to set up the <code>PATH</code> variable either in <em>Preferences</em> → <em>Variables</em> or <code>~/.tm_properties</code> so it can find <code>ninja</code> and related tools; an example could be <code>$PATH:/opt/local/bin</code>.</p>
<p>The default target is <code>TextMate/run</code>. This will relaunch TextMate but when called from within TextMate, a dialog will appear before the current instance is killed. As there is full session restore, it is safe to relaunch even with unsaved changes.</p>
<p>If the current file is a test file then the target to build is changed to build the library to which the test belongs (this is done by setting <code>TM_NINJA_TARGET</code> in the <code>.tm_properties</code> file found in the root of the source tree).</p>
<p>Similarly, if the current file belongs to an application target (other than <code>TextMate.app</code>) then <code>TM_NINJA_TARGET</code> is set to build and run this application.</p>
<h2>Build Targets</h2>
<p>The build system classifies a target either as a library or an application. The latter can either be a bundled or non-bundled application. E.g. <code>mate</code> is non-bundled (just a <code>mate</code> executable) where <code>TextMate.app</code> is a bundled application.</p>
<p>For each output there are a few symbolic targets you can build. While the examples below refer to a specific library or application, they exist for all targets of same type.</p>
<p>For the <code>io</code> library:</p>
<pre><code>ninja io                 # Build the io library and run tests.
ninja io/coerce          # Build the io library and skip tests.
ninja io/clean           # Remove the build folder for the io library.
ninja io/headers         # Copy exported headers to $builddir/include.</code></pre>
<p>For the <code>mate</code> (non-bundled) application:</p>
<pre><code>ninja mate               # Build the mate executable.
ninja mate/run           # Build and run the mate executable.
ninja mate/clean         # Remove the build folder for the mate executable.</code></pre>
<p>For the <code>TextMate.app</code> application:</p>
<pre><code>ninja TextMate           # Build and sign TextMate.app.
ninja TextMate/run       # Build, sign, and run TextMate.app.
ninja TextMate/clean     # Remove the build folder for TextMate.app.
ninja TextMate/dsym      # Create a tarball with extracted dSYM files.
ninja TextMate/tbz       # Create a tarball of TextMate.app. Also produce the dsym tarball.
ninja TextMate/deploy    # Push a nightly build. Fails without proper credentials :)</code></pre>
<p>Note that <code>ninja TextMate/clean</code> only cleans the TextMate build folder (<code>$builddir/Applications/TextMate</code>), but all libraries and applications it depends on are not cleaned.</p>
<p>To clean everything run:</p>
<pre><code>ninja -t clean</code></pre>
<h1>Legal</h1>
<p>The source for TextMate is released under the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.</p>
<p>TextMate is a trademark of Allan Odgaard.</p>